GNU/Linux >> Tutoriels Linux >  >> Ubuntu

Connexion sans fil lente/incohérente après une nouvelle installation d'Ubuntu 14.04 (realtek Rtl8188ee) ?

J'utilise Ubuntu 14.04 en utilisant les versions de développement depuis plus d'un mois sans problème. Ensuite, j'ai mis à jour à la date de sortie officielle et le problème a commencé. J'ai été frustré et j'ai fait une nouvelle installation et j'ai toujours le même problème.

Je peux très bien me connecter à mon réseau sans fil, mais ma force et ma vitesse de connexion sont très sporadiques. Il semble osciller de très lent à normal très rapidement comme une vague. Les résultats du ping ci-dessous avec mon routeur pourraient illustrer cela.

Ping routeur, charge normale à faible :

    PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
64 bytes from 10.0.0.1: icmp_seq=5 ttl=64 time=1.73 ms
64 bytes from 10.0.0.1: icmp_seq=6 ttl=64 time=1.69 ms
64 bytes from 10.0.0.1: icmp_seq=7 ttl=64 time=5.71 ms
64 bytes from 10.0.0.1: icmp_seq=8 ttl=64 time=2.10 ms
64 bytes from 10.0.0.1: icmp_seq=9 ttl=64 time=14.9 ms
64 bytes from 10.0.0.1: icmp_seq=10 ttl=64 time=1.41 ms
64 bytes from 10.0.0.1: icmp_seq=11 ttl=64 time=1.48 ms
64 bytes from 10.0.0.1: icmp_seq=12 ttl=64 time=1.38 ms
64 bytes from 10.0.0.1: icmp_seq=13 ttl=64 time=15.1 ms
64 bytes from 10.0.0.1: icmp_seq=14 ttl=64 time=3.32 ms
64 bytes from 10.0.0.1: icmp_seq=15 ttl=64 time=1.86 ms
64 bytes from 10.0.0.1: icmp_seq=17 ttl=64 time=521 ms
64 bytes from 10.0.0.1: icmp_seq=18 ttl=64 time=1.41 ms
64 bytes from 10.0.0.1: icmp_seq=19 ttl=64 time=1.37 ms
64 bytes from 10.0.0.1: icmp_seq=20 ttl=64 time=1.81 ms
64 bytes from 10.0.0.1: icmp_seq=21 ttl=64 time=1.37 ms
64 bytes from 10.0.0.1: icmp_seq=22 ttl=64 time=5.79 ms
64 bytes from 10.0.0.1: icmp_seq=23 ttl=64 time=28.1 ms
64 bytes from 10.0.0.1: icmp_seq=24 ttl=64 time=4307 ms
64 bytes from 10.0.0.1: icmp_seq=25 ttl=64 time=3307 ms
64 bytes from 10.0.0.1: icmp_seq=29 ttl=64 time=104 ms
64 bytes from 10.0.0.1: icmp_seq=30 ttl=64 time=1012 ms
64 bytes from 10.0.0.1: icmp_seq=31 ttl=64 time=4.00 ms
64 bytes from 10.0.0.1: icmp_seq=32 ttl=64 time=1.40 ms
64 bytes from 10.0.0.1: icmp_seq=33 ttl=64 time=1.38 ms
64 bytes from 10.0.0.1: icmp_seq=34 ttl=64 time=1008 ms
64 bytes from 10.0.0.1: icmp_seq=35 ttl=64 time=625 ms
64 bytes from 10.0.0.1: icmp_seq=36 ttl=64 time=5.73 ms
64 bytes from 10.0.0.1: icmp_seq=37 ttl=64 time=22.1 ms
64 bytes from 10.0.0.1: icmp_seq=38 ttl=64 time=1110 ms
64 bytes from 10.0.0.1: icmp_seq=39 ttl=64 time=519 ms
64 bytes from 10.0.0.1: icmp_seq=40 ttl=64 time=4.82 ms
64 bytes from 10.0.0.1: icmp_seq=41 ttl=64 time=3.03 ms
64 bytes from 10.0.0.1: icmp_seq=42 ttl=64 time=1009 ms
64 bytes from 10.0.0.1: icmp_seq=44 ttl=64 time=105 ms
64 bytes from 10.0.0.1: icmp_seq=45 ttl=64 time=3.03 ms
64 bytes from 10.0.0.1: icmp_seq=46 ttl=64 time=1008 ms
64 bytes from 10.0.0.1: icmp_seq=47 ttl=64 time=1.67 ms
64 bytes from 10.0.0.1: icmp_seq=48 ttl=64 time=1001 ms
64 bytes from 10.0.0.1: icmp_seq=49 ttl=64 time=509 ms
64 bytes from 10.0.0.1: icmp_seq=50 ttl=64 time=1.97 ms
64 bytes from 10.0.0.1: icmp_seq=51 ttl=64 time=1.39 ms
64 bytes from 10.0.0.1: icmp_seq=52 ttl=64 time=502 ms
^C
--- 10.0.0.1 ping statistics ---
52 packets transmitted, 43 received, 17% packet loss, time 51102ms
rtt min/avg/max/mdev = 1.371/390.573/4307.355/845.151 ms, pipe 5

Infos sans fil :

########## wireless info START ##########

##### release #####

Distributor ID: Ubuntu
Description:    Ubuntu 14.04 LTS
Release:    14.04
Codename:   trusty

##### kernel #####

Linux kyle-pc 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

##### lspci #####

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0181]
    Kernel driver in use: rtl8188ee
03:00.0 Ethernet controller [0200]: Qualcomm Atheros QCA8171 Gigabit Ethernet [1969:10a1] (rev 10)
    Subsystem: Toshiba America Info Systems Device [1179:fa40]
    Kernel driver in use: alx

##### lsusb #####

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 13d3:5606 IMC Networks 
Bus 001 Device 008: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 007: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 001 Device 006: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 004: ID 2001:f103 D-Link Corp. DUB-H7 7-port USB 2.0 hub
Bus 001 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 1058:07a8 Western Digital Technologies, Inc. 
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA Card Info #####

##### rfkill #####

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

##### iw reg get #####

country US:
    (2402 - 2472 @ 40), (3, 27)
    (5170 - 5250 @ 40), (3, 17)
    (5250 - 5330 @ 40), (3, 20), DFS
    (5490 - 5600 @ 40), (3, 20), DFS
    (5650 - 5710 @ 40), (3, 20), DFS
    (5735 - 5835 @ 40), (3, 30)
    (57240 - 63720 @ 2160), (N/A, 40)

##### interfaces #####

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

##### iwconfig #####

wlan0     IEEE 802.11bgn  ESSID:"HOME-3B12"  
          Mode:Managed  Frequency:2.462 GHz  Access Point: <MAC address removed>   
          Bit Rate=65 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=59/70  Signal level=-51 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

##### route #####

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.0.0.1        0.0.0.0         UG    0      0        0 wlan0
10.0.0.0        0.0.0.0         255.255.255.0   U     9      0        0 wlan0

##### resolv.conf #####

nameserver 127.0.1.1
search hsd1.wa.comcast.net

##### nm-tool #####

NetworkManager Tool

State: connected (global)

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            alx
  State:             disconnected
  Default:           no
  HW Address:        <MAC address removed>

  Capabilities:
    Carrier Detect:  yes
    Speed:           100 Mb/s

  Wired Properties
    Carrier:         on

- Device: wlan0  [HOME-3B12] ---------------------------------------------------
  Type:              802.11 WiFi
  Driver:            rtl8188ee
  State:             connected
  Default:           yes
  HW Address:        <MAC address removed>

  Capabilities:
    Speed:           65 Mb/s

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points (* = current AP)
    Heather:         Infra, <MAC address removed>, Freq 2422 MHz, Rate 54 Mb/s, Strength 34 WPA2
    13401:           Infra, <MAC address removed>, Freq 2437 MHz, Rate 54 Mb/s, Strength 27 WPA2
    nariya:          Infra, <MAC address removed>, Freq 2412 MHz, Rate 54 Mb/s, Strength 100 WPA WPA2
    2WIRE826:        Infra, <MAC address removed>, Freq 2462 MHz, Rate 54 Mb/s, Strength 74 WEP
    belkin.f9c:      Infra, <MAC address removed>, Freq 2437 MHz, Rate 54 Mb/s, Strength 27 WPA2
    Heather_VAP:     Infra, <MAC address removed>, Freq 2422 MHz, Rate 54 Mb/s, Strength 54 WPA2
    belkin.f9c.guests: Infra, <MAC address removed>, Freq 2437 MHz, Rate 54 Mb/s, Strength 27
    test:            Infra, <MAC address removed>, Freq 2462 MHz, Rate 54 Mb/s, Strength 46 WPA2
    *HOME-3B12:      Infra, <MAC address removed>, Freq 2462 MHz, Rate 54 Mb/s, Strength 66 WPA WPA2

  IPv4 Settings:
    Address:         10.0.0.3
    Prefix:          24 (255.255.255.0)
    Gateway:         10.0.0.1

    DNS:             75.75.75.75
    DNS:             75.75.76.76

##### NetworkManager.state #####

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true

##### NetworkManager.conf #####

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=false

##### iwlist #####

##### iwlist channel #####

wlan0     11 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Current Frequency:2.462 GHz (Channel 11)

##### lsmod #####

rtl8188ee              89601  0 
rtl_pci                26690  1 rtl8188ee
rtlwifi                63475  2 rtl_pci,rtl8188ee
mac80211              626489  3 rtl_pci,rtlwifi,rtl8188ee
cfg80211              484040  2 mac80211,rtlwifi

##### modinfo #####

filename:       /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/rtlwifi/rtl8188ee/rtl8188ee.ko
firmware:       rtlwifi/rtl8188efw.bin
description:    Realtek 8188E 802.11n PCI wireless
license:        GPL
author:         Larry Finger    <[email protected]>
author:         Realtek WlanFAE <[email protected]>
author:         zhiyuan_yang    <[email protected]>
srcversion:     1B8E36556B30AA35325F55D
alias:          pci:v000010ECd00008179sv*sd*bc*sc*i*
depends:        rtlwifi,rtl_pci,mac80211
intree:         Y
vermagic:       3.13.0-24-generic SMP mod_unload modversions 
signer:         Magrathea: Glacier signing key
sig_key:        <MAC address removed>:47:4B:C5:C4:31:20:88:0C:1B:94:A5:39:F4:31
sig_hashalgo:   sha512
parm:           swenc:Set to 1 for software crypto (default 0)
 (bool)
parm:           ips:Set to 0 to not use link power save (default 1)
 (bool)
parm:           swlps:Set to 1 to use SW control power save (default 0)
 (bool)
parm:           fwlps:Set to 1 to use FW control power save (default 1)
 (bool)
parm:           debug:Set debug level (0-5) (default 0) (int)

filename:       /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
description:    PCI basic driver for rtlwifi
license:        GPL
author:         Larry Finger    <[email protected]>
author:         Realtek WlanFAE <[email protected]>
author:         lizhaoming  <[email protected]>
srcversion:     B6B8AA929B5F982954A6DE1
depends:        mac80211,rtlwifi
intree:         Y
vermagic:       3.13.0-24-generic SMP mod_unload modversions 
signer:         Magrathea: Glacier signing key
sig_key:        <MAC address removed>:47:4B:C5:C4:31:20:88:0C:1B:94:A5:39:F4:31
sig_hashalgo:   sha512

filename:       /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
description:    Realtek 802.11n PCI wireless core
license:        GPL
author:         Larry Finger    <[email protected]>
author:         Realtek WlanFAE <[email protected]>
author:         lizhaoming  <[email protected]>
srcversion:     C21FC2F90947540319DE390
depends:        mac80211,cfg80211
intree:         Y
vermagic:       3.13.0-24-generic SMP mod_unload modversions 
signer:         Magrathea: Glacier signing key
sig_key:        <MAC address removed>:47:4B:C5:C4:31:20:88:0C:1B:94:A5:39:F4:31
sig_hashalgo:   sha512

##### modules #####

lp
rtc

##### blacklist #####

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/fbdev-blacklist.conf]
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist gx1fb
blacklist gxfb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist nvidiafb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist viafb
blacklist vt8623fb

##### udev rules #####

# PCI device 0x1969:0x10a1 (alx)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x10ec:0x8179 (rtl8188ee)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"

##### dmesg #####

[    9.624682] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin
[    9.624741] rtl8188ee 0000:02:00.0: irq 45 for MSI/MSI-X
[    9.924965] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    9.925132] rtlwifi: wireless switch is on
[   18.918325] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.918581] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   43.903719] wlan0: authenticate with <MAC address removed>
[   43.913895] wlan0: send auth to <MAC address removed> (try 1/3)
[   43.915033] wlan0: authenticated
[   43.917383] wlan0: associate with <MAC address removed> (try 1/3)
[   43.932789] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=2)
[   43.932928] wlan0: associated
[   43.932935] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.926537] wlan0: deauthenticating from <MAC address removed> by local choice (reason=3)
[   61.431876] wlan0: authenticate with <MAC address removed>
[   61.451881] wlan0: send auth to <MAC address removed> (try 1/3)
[   61.453694] wlan0: authenticated
[   61.455569] wlan0: associate with <MAC address removed> (try 1/3)
[   61.469978] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=2)
[   61.470130] wlan0: associated
[  685.299878] wlan0: deauthenticating from <MAC address removed> by local choice (reason=3)
[  686.755325] wlan0: authenticate with <MAC address removed>
[  686.764888] wlan0: send auth to <MAC address removed> (try 1/3)
[  686.766551] wlan0: authenticated
[  686.770599] wlan0: associate with <MAC address removed> (try 1/3)
[  686.775232] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=3)
[  686.775395] wlan0: associated
[  732.676315] wlan0: deauthenticating from <MAC address removed> by local choice (reason=3)
[  733.622817] wlan0: authenticate with <MAC address removed>
[  733.642409] wlan0: send auth to <MAC address removed> (try 1/3)
[  733.644589] wlan0: authenticated
[  733.646068] wlan0: associate with <MAC address removed> (try 1/3)
[  733.660412] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=2)
[  733.660569] wlan0: associated
[  768.243619] wlan0: deauthenticating from <MAC address removed> by local choice (reason=3)
[  963.122973] wlan0: authenticate with <MAC address removed>
[  963.142715] wlan0: send auth to <MAC address removed> (try 1/3)
[  963.144191] wlan0: authenticated
[  963.146329] wlan0: associate with <MAC address removed> (try 1/3)
[  963.162557] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=6)
[  963.162723] wlan0: associated
[ 1008.407427] wlan0: Connection to AP <MAC address removed> lost
[ 1010.458107] wlan0: authenticate with <MAC address removed>
[ 1010.477578] wlan0: send auth to <MAC address removed> (try 1/3)
[ 1010.478699] wlan0: authenticated
[ 1010.481203] wlan0: associate with <MAC address removed> (try 1/3)
[ 1010.495617] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=6)
[ 1010.495788] wlan0: associated
[ 1284.910957] wlan0: deauthenticating from <MAC address removed> by local choice (reason=3)
[ 1607.970540] wlan0: authenticate with <MAC address removed>
[ 1607.979974] wlan0: send auth to <MAC address removed> (try 1/3)
[ 1607.982241] wlan0: authenticated
[ 1607.985604] wlan0: associate with <MAC address removed> (try 1/3)
[ 1607.989180] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=3)
[ 1607.989347] wlan0: associated
[ 1641.945884] wlan0: deauthenticating from <MAC address removed> by local choice (reason=3)
[ 1643.299913] wlan0: authenticate with <MAC address removed>
[ 1643.319630] wlan0: send auth to <MAC address removed> (try 1/3)
[ 1643.321682] wlan0: authenticated
[ 1643.323277] wlan0: associate with <MAC address removed> (try 1/3)
[ 1643.338946] wlan0: RX AssocResp from <MAC address removed> (capab=0x411 status=0 aid=5)
[ 1643.339113] wlan0: associated

########## wireless info END ############

MODIF :

Connexe :les programmes en cours d'exécution ne s'affichent pas dans le panneau ?

Mon ordinateur portable est un Toshiba Satellite S55-A5294.

Après avoir mis à jour mon noyau vers 3.14.1 et 3.14.2 (actuellement utilisé), mon réseau sans fil est maintenant utilisable parfois (ce qui me rend heureux).

Je perds 0 % des paquets environ 70 % du temps et entre 1 et 100 % de perte de paquets les 30 % restants

La reconnexion à mon réseau sans fil est la seule solution que j'ai trouvée jusqu'à présent, mais cela ne résout pas toujours le problème.

Connexe :Comment remonter une partition différente en tant que /home ?

/var/log/syslog en cas de problème

En cas de perte de 100 % des paquets

tail -f /var/log/syslog    
May  5 13:05:19 kyle-pc NetworkManager[1107]: <info> (wlan0): supplicant interface state: associating -> associated
May  5 13:05:20 kyle-pc NetworkManager[1107]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
May  5 13:05:20 kyle-pc wpa_supplicant[12275]: wlan0: WPA: Key negotiation completed with 00:1d:d2:60:3b:10 [PTK=CCMP GTK=TKIP]
May  5 13:05:20 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:1d:d2:60:3b:10 completed [id=0 id_str=]
May  5 13:05:20 kyle-pc NetworkManager[1107]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
May  5 13:05:59 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:04:52 kyle-pc whoopsie[1332]: message repeated 10 times: [ online]
May  5 13:06:11 kyle-pc whoopsie[1332]: offline
May  5 13:06:31 kyle-pc whoopsie[1332]: offline
May  5 13:06:56 kyle-pc whoopsie[1332]: online
May  5 13:08:16 kyle-pc whoopsie[1332]: message repeated 5 times: [ online]
May  5 13:09:16 kyle-pc whoopsie[1332]: offline
May  5 13:09:21 kyle-pc whoopsie[1332]: online

En cas de perte de 1 à 99 % des paquets

tail -f /var/log/syslog
May  5 13:29:48 kyle-pc NetworkManager[1107]: <info> Activation (wlan0) successful, device activated.
May  5 13:29:48 kyle-pc whoopsie[1332]: message repeated 7 times: [ offline]
May  5 13:29:49 kyle-pc whoopsie[1332]: online
May  5 13:29:54 kyle-pc ntpdate[12460]: adjust time server 91.189.89.199 offset 0.012340 sec
May  5 13:30:05 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:30:08 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:30:48 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:30:51 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:31:51 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:33:14 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:33:17 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:34:46 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:36:57 kyle-pc wpa_supplicant[12275]: message repeated 2 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
May  5 13:37:00 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:38:57 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:39:00 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:39:46 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:40:57 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:41:00 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:42:57 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:43:00 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:44:46 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:44:57 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:45:00 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33
May  5 13:46:57 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:48:57 kyle-pc wpa_supplicant[12275]: wlan0: CTRL-EVENT-SCAN-STARTED 
May  5 13:49:00 kyle-pc wpa_supplicant[12275]: nl80211: send_and_recv->nl_recvmsgs failed: -33

Je ne sais pas si ces journaux sont une indication de la cause de ce problème ou simplement une notification qu'il se produit.

Toutes les idées seraient grandement appréciées.

Réponse acceptée :

C'est un problème que j'ai également rencontré. Pour le résoudre, vous devez mettre à jour votre noyau manuellement. Personnellement, j'ai effectué la mise à jour vers la version 3.14.1.

Voici un guide sur la mise à jour manuelle du noyau :Comment mettre à jour le noyau vers la dernière version principale sans aucune mise à niveau de distribution ?

EDIT :Je ne savais pas non plus quand j'ai posté ceci, mais j'ai la même carte sans fil que vous, donc cela devrait fonctionner. Je ne peux garantir aucune autre carte.


Ubuntu
  1. 10 choses à faire après l'installation d'Ubuntu Desktop

  2. Choses à faire après l'installation d'Ubuntu 16.04 LTS

  3. Choses à faire sur une nouvelle installation de serveur Ubuntu 20.04

  4. Paquets cassés d'Ubuntu 16.04 après une nouvelle installation ?

  5. Après une installation propre d'Ubuntu 14.04, j'obtiens une erreur signée Shim?

Choses à faire après l'installation d'Ubuntu 13.10

20 choses à faire après une nouvelle installation d'Ubuntu 18.04 LTS

15 choses à faire après l'installation d'Ubuntu 17.10 "Artful Aardvark"

2 façons d'installer Android Studio dans Ubuntu 20.04/Ubuntu 18.04

Paramètres Nvidia vides après l'installation du pilote V. 331.67 sur Ubuntu 14.04 ?

30 choses à faire après l'installation d'Ubuntu 15.10