smartd est un démon qui surveille le système SMART (Self-Monitoring, Analysis and Reporting Technology) intégré à de nombreux disques durs ATA-3 et ultérieurs ATA, IDE et SCSI-3. Le but de SMART est de surveiller la fiabilité du disque dur et de prévoir les pannes de disque, et d'effectuer différents types d'autotests de disque. Cette version de smartd est compatible avec les normes ATA/ATAPI-7 et antérieures.
smartd tentera d'activer la surveillance SMART sur les périphériques ATA (équivalent à smartctl -s on) et interroge ces périphériques et SCSI toutes les 30 minutes (configurable), enregistrant les erreurs SMART et les modifications des attributs SMART via l'interface SYSLOG. L'emplacement par défaut de ces notifications et avertissements SYSLOG est /var/log/messages. Pour modifier l'emplacement par défaut, reportez-vous à l'option de ligne de commande "-l" décrite ci-dessous.
En plus de se connecter à un fichier, smartd peut également être configuré pour envoyer des avertissements par e-mail si des problèmes sont détectés. Selon le type de problème, vous pouvez exécuter des auto-tests sur le disque, sauvegarder le disque, remplacer le disque ou utiliser l'utilitaire d'un fabricant pour forcer la réallocation des secteurs de disque défectueux ou illisibles. Si des problèmes de disque sont détectés, reportez-vous à la page de manuel de smartctl et à la page Web/FAQ de smartmontools pour plus d'informations.
Gestion des services
Emplacement du script init.d :
/etc/init.d/smartd
Exemple de "chkconfig –list smartd"
# chkconfig --list smartd smartd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
Options d'utilisation du service disponibles
# service smartd
Usage: /etc/init.d/smartd {start|stop|reload|report|restart|status} # service smartd start Starting smartd: [ OK ]
# service smartd stop Shutting down smartd: [ OK ]
# service smartd status smartd (pid 4061 2857) is running...
# service smartd restart Shutting down smartd: [ OK ] Starting smartd: [ OK ]
# service smartd reload Reloading smartd daemon configuration: [ OK ]
# service smartd report Checking SMART devices now: [ OK ]
Quels démons exécute-t-il :
/usr/sbin/smartd
Configuration
Paquets RPM :
smartmontools-[version]-[release]
Fichier de configuration
/etc/smartd.conf ### For CentOS/RHEL 5,6 /etc/smartmontools/smartd.conf . ### For CentOS/RHEL 7
Exemple de fichier de configuration /etc/smartmontools/smartd.conf
# cat /etc/smartmontools/smartd.conf # Sample configuration file for smartd. See man smartd.conf. # Home page is: http://smartmontools.sourceforge.net # $Id: smartd.conf 3651 2012-10-18 15:11:36Z samm2 $ # smartd will re-read the configuration file if it receives a HUP # signal # The file gives a list of devices to monitor using smartd, with one # device per line. Text after a hash (#) is ignored, and you may use # spaces and tabs for white space. You may use '\' to continue lines. # You can usually identify which hard disks are on your system by # looking in /proc/ide and in /proc/scsi. # The word DEVICESCAN will cause any remaining lines in this # configuration file to be ignored: it tells smartd to scan for all # ATA and SCSI devices. DEVICESCAN may be followed by any of the # Directives listed below, which will be applied to all devices that # are found. Most users should comment out DEVICESCAN and explicitly # list the devices that they wish to monitor. DEVICESCAN -H -m root -M exec /usr/libexec/smartmontools/smartdnotify -n standby,10,q # Alternative setting to ignore temperature and power-on hours reports # in syslog. #DEVICESCAN -I 194 -I 231 -I 9 # Alternative setting to report more useful raw temperature in syslog. #DEVICESCAN -R 194 -R 231 -I 9 # Alternative setting to report raw temperature changes >= 5 Celsius # and min/max temperatures. #DEVICESCAN -I 194 -I 231 -I 9 -W 5 # First (primary) ATA/IDE hard disk. Monitor all attributes, enable # automatic online data collection, automatic Attribute autosave, and # start a short self-test every day between 2-3am, and a long self test # Saturdays between 3-4am. #/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03) # Monitor SMART status, ATA Error Log, Self-test log, and track # changes in all attributes except for attribute 194 #/dev/hdb -H -l error -l selftest -t -I 194 # Monitor all attributes except normalized Temperature (usually 194), # but track Temperature changes >= 4 Celsius, report Temperatures # >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5). # Send mail on SMART failures or when Temperature is >= 55 Celsius. #/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m [email protected] # An ATA disk may appear as a SCSI device to the OS. If a SCSI to # ATA Translation (SAT) layer is between the OS and the device then # this can be flagged with the '-d sat' option. This situation may # become common with SATA disks in SAS and FC environments. # /dev/sda -a -d sat # A very silent check. Only report SMART health status if it fails # But send an email in this case #/dev/hdc -H -C 0 -U 0 -m [email protected] # First two SCSI disks. This will monitor everything that smartd can # monitor. Start extended self-tests Wednesdays between 6-7pm and # Sundays between 1-2 am #/dev/sda -d scsi -s L/../../3/18 #/dev/sdb -d scsi -s L/../../7/01 # Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses # the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4, # and 4-5 am. # NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface # is DEPRECATED. Use the /dev/tweN character device interface instead. # For example /dev/twe0, /dev/twe1, and so on. #/dev/sdc -d 3ware,0 -a -s L/../../7/01 #/dev/sdc -d 3ware,1 -a -s L/../../7/02 #/dev/sdc -d 3ware,2 -a -s L/../../7/03 #/dev/sdc -d 3ware,3 -a -s L/../../7/04 # Monitor 2 ATA disks connected to a 3ware 9000 controller which # uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays # between 1-2 and 3-4 am. #/dev/twa0 -d 3ware,0 -a -s L/../../2/01 #/dev/twa0 -d 3ware,1 -a -s L/../../2/03 # Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which # uses the 3w-sas driver (Linux). Start long self-tests Tuesdays # between 1-2 and 3-4 am. # On FreeBSD /dev/tws0 should be used instead #/dev/twl0 -d 3ware,0 -a -s L/../../2/01 #/dev/twl0 -d 3ware,1 -a -s L/../../2/03 # Same as above for Windows. Option '-d 3ware,N' is not necessary, # disk (port) number is specified in device name. # NOTE: On Windows, DEVICESCAN works also for 3ware controllers. #/dev/hdc,0 -a -s L/../../2/01 #/dev/hdc,1 -a -s L/../../2/03 # Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long # self-tests Sundays between 1-2, 2-3, and 3-4 am. #/dev/sdd -d hpt,1/1 -a -s L/../../7/01 #/dev/sdd -d hpt,1/2 -a -s L/../../7/02 #/dev/sdd -d hpt,1/3 -a -s L/../../7/03 # Monitor 2 ATA disks connected to the same PMPort which connected to the # HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am #/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01 #/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03 # HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE. # PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS # # -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N # -T TYPE set the tolerance to one of: normal, permissive # -o VAL Enable/disable automatic offline tests (on/off) # -S VAL Enable/disable attribute autosave (on/off) # -n MODE No check. MODE is one of: never, sleep, standby, idle # -H Monitor SMART Health Status, report if failed # -l TYPE Monitor SMART log. Type is one of: error, selftest # -f Monitor for failure of any 'Usage' Attributes # -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f # -M TYPE Modify email warning behavior (see man page) # -s REGE Start self-test when type/date matches regular expression (see man page) # -p Report changes in 'Prefailure' Normalized Attributes # -u Report changes in 'Usage' Normalized Attributes # -t Equivalent to -p and -u Directives # -r ID Also report Raw values of Attribute ID with -p, -u or -t # -R ID Track changes in Attribute ID Raw value with -p, -u or -t # -i ID Ignore Attribute ID for -f Directive # -I ID Ignore Attribute ID for -p, -u or -t Directive # -C ID Report if Current Pending Sector count non-zero # -U ID Report if Offline Uncorrectable count non-zero # -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit # -v N,ST Modifies labeling of Attribute N (see man page) # -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198 # -F TYPE Use firmware bug workaround. Type is one of: none, samsung # -P TYPE Drive-specific presets: use, ignore, show, showall # # Comment: text after a hash sign is ignored # \ Line continuation character # Attribute ID is a decimal integer 1 <= ID <= 255 # except for -C and -U, where ID = 0 turns them off. # All but -d, -m and -M Directives are only implemented for ATA devices # # If the test string DEVICESCAN is the first uncommented text # then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z] # DEVICESCAN may be followed by any desired Directives.Comment surveiller la santé du disque avec smartd (S.M.A.R.T.)
Comment vérifier si un disque contient des blocs défectueux ou des erreurs de disque sur CentOS/RHEL